Home > Products > IP Grade Test Chambers >

Dust Test Chamber

Model: 512L/800L/1000L/1500L

Apply to: IP5X IP6X Dustproof Tests

Application: Enclosures, Automotive Parts, Electronics, LED lights, etc.

  • Feature
  • Specification

    Overview
    Dust and Sand Test Chamber has used in the test the sealing property of product's housing.It is mainly applied for IP5X and IP6X these 2 grade's test. It mainly simulates the damage to lock, automobile part, sealing element, display etc. product in the sand and dust storm weather.
     

    Feature

    ● Air velocity sensor inside chamber
    ● Programmable controller with touch-screen display. Data logging and download.
    ● Full-Opening Front Loading Door
    ● 3” Thick Foam Insulation
    ● Tri-color Indicator and EMO (Emergency off switch)
    ● Cable Access Port Holes (diameter50&100 mm)
    ● Interior lights
    ● All wires numbered for easy identification
    ● Easy-to-operate models.
    ● Fixable and movable casters with great convenience.
    ● Multiple protections on phase sequence, power leakage, etc.
    ● Easily accessible maintenance elements.
    ● Operation : Program or manual
     

    Test Standards

    This test equipment conforms to following test standards (but not limited to):
    ●GB 4208-2008
    ●IEC 60529
    ●GJB 150.12A-2009
    ●GJB150.12-86

     

    Sizes of Dust Test Chamber
    Model
    Volume (L)
    Rated Power 
    Internal Dimension (mm) D*W*H
    External Dimension (mm) D*W*H
    LRHS-512-PS
    512
    2.5kw
    800*800*800
    1300*1050*1750
    LRHS-800-PS
    800
    2.5kw
    800*1000*1000
    1300*1250*1950
    LRHS-1000-PS
    1000
    2.5kw
    1000*1000*1000
    1600*1250*1980
    LRHS-1500-PS
    1500
    2.5kw
    1000*1500*1000
    1600*1750*1980
    Basic Specification
    Performance
    Air speed Not Exceed 2m/s Lowing 
    Time setting Range 1~999H adjustable   
    Sand and dust concentration 2~4kg/m3 
    Test Dust Dry Talcum powder,Silicate cement,smoke ash,etc.
    Vacuum pump flow control 60~600L/H
    Dust method continous.period blowing dust time setting is optional
    Structure
    External Casing Cold-rolled A3 (Q235) steel plates with plastics painted. 
    Interior Working Room Stainless Steel Plates SUS304 with miror surface
    Heat Isolation Polyurethane foams and fine glass fibres
    Viewing Window Toughened glass with conductive films for heating to defrost(395×395mm)
    Door Manually operated sliding door with unlock button
    Control System
    Controller Programmable Touch-screen controller “weinview” with data logging and download function
    Heating System Steipped Nickel-chromium Wire Heater
    Dust dehumidification Heating and dehumidification
    Vibration time 1S-99H adjustable
    Blowing time 1S-99H adjustable
    Cycle time Arbitrarily set the blowing time
    Dust heat Use stainless steel Mica Heating coil constant control to prevent dust adhesion 
    Standard Configuration Test Chamber x 1,Dust scraperx 1, talcum powder x 100g , EMO x 1, Tri-color Indicator x 1, etc.
    Safety Protection Power leakage protection, over-load or over-current protection/Fan motor overheating/Dry burning protection. 
    Voltage AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement
    Ambient Enviromental for application 5°C~+30°C ≤ 85%R.H
    Test Standards (not limited to) IEC 60529 IP5X IP6X


直接观看黄网站免费视频-一下子就弄进去岳的身体-亚洲精品美女久久久久9999-曰曰摸夜夜添夜夜添高潮出水